Share:
Notifications
Clear all

Blimpduino not reacting after uploading the code from bithub


e73cf0c231cd03536617e0d8d6190b77?s=80&d=mm&r=g
(@basiq)
Member
Joined: 3 weeks ago
Posts: 2
Topic starter  

Hello, 

this is the error i get after i uploaded the code for blimpduino from the below link mentioned in JJRobots website
https://github.com/mRoboticsIO/Blimpduino2/tree/master
however i also tried uploading the code from zip file given on Assembly guide and this is exactly the response as shown in pictures
As there is no Error suggesting a problem with library to my knowledge, i assume i have all the libraries downloaded for it to work
what wonders me is that it still says the program is uploaded and i don’t understand where the problem is 

the arduino doesnt do anything at all other than the green and red light turning onn
but connects to the wifi as it should

i thank you in advance

best regards

blimp2
blimperror

Quote
Topic Tags
350a26dd49eb55d3494500240423a207?s=80&d=mm&r=g
(@robotn1)
Member Admin
Joined: 5 years ago
Posts: 722
 

Install the Arduino IDE 1.8.10 and SAMD libraries for the same version (1.8.10) that should solve the problem


ReplyQuote
e73cf0c231cd03536617e0d8d6190b77?s=80&d=mm&r=g
(@basiq)
Member
Joined: 3 weeks ago
Posts: 2
Topic starter  

Thank you for your reply 
I have done as you said but there doesnt seem to be any changes to the error 
furthermore i have attatched a screenshot of libraries concluded, if there are any specific library missing, please do mention them

Blimp3
blimp4

ReplyQuote
Share: