Share:
Notifications
Clear all

Can’t connect to iboardbot  


0a56d9fe794d2a0fdcad52ad824e9ea9?s=80&d=mm&r=g
(@happytriger2000)
Active Member Customer
Joined: 3 years ago
Posts: 7
Topic starter  

Hi,
Can anyone tell me how to obtain the Regkey?
I’m stuck at this page!: open attachment!.

If is also so difficult to get to that page too, I had retried so many times in many times in order to get there!!


Quote
275024ff50a20318a5b12fb3ace69c25?s=80&d=mm&r=g
(@anton-mark)
Estimable Member Customer
Joined: 6 years ago
Posts: 175
 

Hi,
Can anyone tell me how to obtain the Regkey?
I’m stuck at this page!: open attachment!.

If is also so difficult to get to that page too, I had retried so many times in many times in order to get there!!

Did you get the iboardbot KIT? or just the DEVIA board? The KIT comes with the REGKEY, otherwise you will have to get it separately


ReplyQuote
0a56d9fe794d2a0fdcad52ad824e9ea9?s=80&d=mm&r=g
(@happytriger2000)
Active Member Customer
Joined: 3 years ago
Posts: 7
Topic starter  

Hi,
Can anyone tell me how to obtain the Regkey?
I’m stuck at this page!: open attachment!.

If is also so difficult to get to that page too, I had retried so many times in many times in order to get there!!

Did you get the iboardbot KIT? or just the DEVIA board? The KIT comes with the REGKEY, otherwise you will have to get it separately

Received an email from JJRobot, found my RegKey, Thanks!
Now I have entered to the Web app page shown below:

su23qejze4w9udz6g

For testing, I entered “Hi” in the TEXT and click “Draw” then Send, no movement at all. The stepper motor shaft is loose when I turn it, means is not energized. The yellow LED is blinking + Solid Green Light:

haz4gi8va5caepr6g


ReplyQuote
350a26dd49eb55d3494500240423a207?s=80&d=mm&r=g
(@robotn1)
Honorable Member Admin
Joined: 5 years ago
Posts: 698
 

Which arduino code are you using? You have the old Brain shield + Arduino. You will need this code instead the one for the DEVIA


ReplyQuote
0a56d9fe794d2a0fdcad52ad824e9ea9?s=80&d=mm&r=g
(@happytriger2000)
Active Member Customer
Joined: 3 years ago
Posts: 7
Topic starter  

Which arduino code are you using? You have the old Brain shield + Arduino. You will need this code instead the one for the DEVIA

Let me ask this 1st, when I purchased the Iboardbot does the Arduino have the code installed already or not?, I haven’t change any code since purchase.


ReplyQuote
350a26dd49eb55d3494500240423a207?s=80&d=mm&r=g
(@robotn1)
Honorable Member Admin
Joined: 5 years ago
Posts: 698
 

Which arduino code are you using? You have the old Brain shield + Arduino. You will need this code instead the one for the DEVIA

Let me ask this 1st, when I purchased the Iboardbot does the Arduino have the code installed already or not?, I haven’t change any code since purchase.

Well. It depends on the KIT you got and the date. When did you order it? Did you get the Plug and Play version or the KIT?
Anyway, programming it is not hard at all. Let me know if you have any problem in the process 😉


ReplyQuote
0a56d9fe794d2a0fdcad52ad824e9ea9?s=80&d=mm&r=g
(@happytriger2000)
Active Member Customer
Joined: 3 years ago
Posts: 7
Topic starter  

The purchase date was July 8 2018, price 241.14 US.
Will upload the code and see what happens.


I uploaded iBoardBot_108.ino to the Arduino Leonardo, and the problem still there!, the stepper motor aren’t locked, is loose…


ReplyQuote
Share: