Arduino Uno and CNC…
 
Share:
Notifications
Clear all

Arduino Uno and CNC Shield V3.0


51c3f6c15c961702da49949e2c4d213e?s=80&d=mm&r=g
(@matej1006)
Member
Joined: 2 years ago
Posts: 5
Topic starter  

Hello

Can i use Uno and CNC Shield V3.0 and if what i need to change.
Please i have this Uno and CNC Shield V3.0 in storage.

Greetings


Quote
c61e3838495d0afa6879f7ff22f1dbc3?s=80&d=mm&r=g
(@justjason)
Member
Joined: 3 years ago
Posts: 25
 

Should work, have a look here

https://github.com/plex3r/EggDuino

and don’t forget to swop the inkscape extensions as mentioned in the instuctions.


ReplyQuote
51c3f6c15c961702da49949e2c4d213e?s=80&d=mm&r=g
(@matej1006)
Member
Joined: 2 years ago
Posts: 5
Topic starter  

Should work, have a look here

https://github.com/plex3r/EggDuino

and don’t forget to swop the inkscape extensions as mentioned in the instuctions.

Thanks i will try today and i hope that it will work’s. Thanks again


ReplyQuote
51c3f6c15c961702da49949e2c4d213e?s=80&d=mm&r=g
(@matej1006)
Member
Joined: 2 years ago
Posts: 5
Topic starter  

i got this error now :

Traceback (most recent call last):
File “eggbot.py”, line 1406, in
e.affect()
File “inkex.py”, line 283, in affect
self.effect()
File “eggbot.py”, line 281, in effect
self.EggbotOpenSerial()
File “eggbot.py”, line 1299, in EggbotOpenSerial
self.serialPort = self.getSerialPort()
File “eggbot.py”, line 1356, in getSerialPort
for strComPort in eggbot_scan.findEiBotBoards():
File “eggbot_scanwin32.py”, line 6, in findEiBotBoards
hKey = _winreg.OpenKey( hReg, r”SYSTEMCurrentControlSetEnumUSBVID_04D8&PID_FD92″ )
WindowsError: [Error 2] The system cannot find the file specified

i delete inkscape fully and is same problem 🙁


ReplyQuote
c61e3838495d0afa6879f7ff22f1dbc3?s=80&d=mm&r=g
(@justjason)
Member
Joined: 3 years ago
Posts: 25
 

Are you using and original Arduino or a clone ?

This version of Inkscape from JJrobots should work with an Arduino

Inkscape Portable for Arduino


ReplyQuote
51c3f6c15c961702da49949e2c4d213e?s=80&d=mm&r=g
(@matej1006)
Member
Joined: 2 years ago
Posts: 5
Topic starter  

Are you using and original Arduino or a clone ?

This version of Inkscape from JJrobots should work with an Arduino

Inkscape Portable for Arduino

In my office i have original Arduino Uno at home i have Clone and it’s same error.

and with that portable i get this error:

The code execution cannot proceed because libglib-2.0-0.dll was not found.

and the i copy all files too file in which I install inkscape and i get same error


ReplyQuote
c61e3838495d0afa6879f7ff22f1dbc3?s=80&d=mm&r=g
(@justjason)
Member
Joined: 3 years ago
Posts: 25
 

I have not seen that issue before, have a look here if you can find something useful
http://forums.jjrobots.com/showthread.php?tid=1199


ReplyQuote
51c3f6c15c961702da49949e2c4d213e?s=80&d=mm&r=g
(@matej1006)
Member
Joined: 2 years ago
Posts: 5
Topic starter  

I have not seen that issue before, have a look here if you can find something useful
http://forums.jjrobots.com/showthread.php?tid=1199

i figurit out i have to add 10uF capacitor instead of resistor to disable autoreset

thanks for help 😉


ReplyQuote
Share: