DEVIA Robotics control board FRONT
Devia Robotics Control board v1.0
Devia Robotics Control board v1.0

This is the Control board that will help you to create your Robotics Project without the hassle of integrating different modules. The DEVIA control board has been used to conceive all the jjRobot projects. We have opted to create a board with enough sensors/ports and outputs but keeping 100% Arduino compatibility.

This board has a powerful ARM M0 processor and will be recognized by the Arduino IDE as the Arduino ZERO with NATIVE USB PORT. Just plug and play! Designed in Europe and Assembled by mrobotics in USA.

Features:

  • ARM Cortex M0 processor (ATSAMD21G18) (the same mounted on the powerful Arduino Zero)
  • ESP12 Wi-Fi module integrated (programmable via GPIO pads on the back of the board)
  • MPU ICM 20600 6 axis (High Performance 3-axis gyroscope, 3-axis accelerometer module)
  • AUX OUTPUT: Controllable Voltage regulator (up to 12V, 1A)
  • Vin Power Jack (the board accepts from 9 to 15V DC)
  • 3x stepper motors outputs
  • 4x servo outputs (up to 1.5A)
  • Customizable button “A” (can be used to change the behaviour of the robot, pause it, change internal parameters…)
  • Reset button
  • i2C port
  • SPI port (perfect to control RGB LED strips)
  • UART port
  • SENSOR port (Analog, Digital, Ground and +3.3V)
  • GPIO on the back of the board
  • Micro USB Port 
  • Arduino UNO footprint
  • 100% Arduino ZERO compatibility. Just connect the board to the computer, and the Arduino IDE will recognize it as the Arduino ZERO board -Native USB port-

* All the headers already soldered

5 out of 5
$41 Add to basket
Motorized CAMERA SLIDER KIT
Motorized CAMERA SLIDER KIT
Motorized CAMERA SLIDER KIT

JJrobots´s CAMERA SLIDER Kit. Created to simplify the set up and integration of all the different devices involved in this project.

This is a remotely controlled CAMERA SLIDER with tracking system. Two motors will be in charge of moving a platform where you can attach your smartphone/GOPRO or DSLR camera and, at the same time, pan it tracking an object.

What you get when you buy this KIT:

  • Devia Robotics Control Board + USB cable
  • 2x High Quality NEMA17 stepper motors 70+14 cms cables (pair)
  • 2x A4988 Stepper motor driver
  • 12V 2A power supply (USA/EUR/UK plug)
  • 3x LM8UU linear ball bearing bushings
  • Bolts+nuts needed to set everything up
  • GT2 6mm timing belt (1,4 m)
  • 1x 20 tooth GT2 pulley
  • 1x 608 circular bearing
  • 2x 623 circular bearing
  • Optional: 1x CAMERA screw (D Shaft D-ring 1/4 Inch) : needed if you want to attach a SLR/DSLR camera to the moving platform)
  • Optional: 3D printed parts 
  • Optional: 2x 8mm (5/16 inch) 700mm stainless steel round bars (grade 304)
  • Optional: 6x AA Battery case with ON/OFF Switch  (batteries not included)

 

 

CUSTOMIZE YOUR KIT

Save you the hassle of getting all the elements from different sources. We will supply everything with the correct dimensions and quantities.

4.6 out of 5
$91 Add to basket
NEMA 17 Stepper motor (PACK OF 2/3) + CUSTOM CABLES
NEMA 17 Stepper motor (PACK OF 2/3) + CUSTOM CABLES
NEMA 17 Stepper motor (PACK OF 2/3) + CUSTOM CABLES

This is the motor used in every jjRobots Project. You liked the motors which came with your kit and want another pack of two? Did you like its sturdiness / easy plug-in connector (forget to solder every time you have to change the cable length) ? This is the perfect stepper motor for MAKERs and Robots enthusiasts.

Pick a custom length cable for each motor for free!

SPECIFICATIONS

Manufacturer Part Number MT-1703HS168A
Step Angle 1.8°
Step Accuracy <5%
Holding Torque 45 N·cm (62oz.in)
Rated Current/phase 1.68A
Phase Resistance 1.65ohms
Voltage 12-24  V
Inductance 3.6mH±20%(1KHz)
Weight 280g

5 out of 5
$21 Add to basket