DEVIA Robotics control board FRONT
Devia Robotics Control board v1.0
Devia Robotics Control board v1.0

This is the Control board that will help you to create your Robotics Project without the hassle of integrating different modules. The DEVIA control board has been used to conceive all the jjRobot projects. We have opted to create a board with enough sensors/ports and outputs but keeping 100% Arduino compatibility.

This board has a powerful ARM M0 processor and will be recognized by the Arduino IDE as the Arduino ZERO with NATIVE USB PORT. Just plug and play! Designed in Europe and Assembled by mrobotics in USA.

Features:

  • ARM Cortex M0 processor (ATSAMD21G18) (the same mounted on the powerful Arduino Zero)
  • ESP12 Wi-Fi module integrated (programmable via GPIO pads on the back of the board)
  • MPU ICM 20600 6 axis (High Performance 3-axis gyroscope, 3-axis accelerometer module)
  • AUX OUTPUT: Controllable Voltage regulator (up to 12V, 1A)
  • Vin Power Jack (the board accepts from 9 to 15V DC)
  • 3x stepper motors outputs
  • 4x servo outputs (up to 1.5A)
  • Customizable button “A” (can be used to change the behaviour of the robot, pause it, change internal parameters…)
  • Reset button
  • i2C port
  • SPI port (perfect to control RGB LED strips)
  • UART port
  • SENSOR port (Analog, Digital, Ground and +3.3V)
  • GPIO on the back of the board
  • Micro USB Port¬†
  • Arduino UNO footprint
  • 100% Arduino ZERO compatibility. Just connect the board to the computer, and the Arduino IDE will recognize it as the Arduino ZERO board -Native USB port-

* All the headers already soldered

5 out of 5
$41 Add to basket