Sale!
B-Robot EVO KIT (Plug+Play version)
B-Robot EVO KIT (Plug+Play version)
B-Robot EVO KIT (Plug+Play version)

JJrobots´s B-ROBOT EVO 2 Kit (self-balancing robot). Created to simplify the set up and integration of all the different devices involved in this project.

This COMPLETE VERSION includes all the electronic and hardware components required to create the self-balancing robot. You just need to assemble everything  (optional 3D parts)

What you get when you buy this KIT:

  •  DEVIA Arduino Zero Control Board
  •  USB cable
  •  2x High Quality NEMA17 stepper motors +14 cms cables (pair)
  •  2x Stepper motor driver
  • Powerful servo: Metal gears (you will need an arm to fight and raise your B-robot…)
  • 6x AA Battery case with ON/OFF Switch  (batteries not included)
  • Bolts+nuts needed to set everything up
  • Double side tape, googly eyes…
  • Optional: 3D printed parts 

NEW: control your B-robot using the JJrobots FREE APP! (Android devices) or the iOS APP (for iOS devices)

   

CUSTOMISE YOUR SELF-BALANCING ROBOT:

4.59259259259 out of 5
89 79 Add to basket
Blimpduino 2.0 Control board
Blimpduino 2.0 Control board
Blimpduino 2.0 Control board

What you get:

  • Blimpduino Control Board (battery connector not soldered)
  • 2 row headers servo connectors (2x servos)
  •  Lipo cable connector 1 CELL (1S) 3.7v
Control board elements

5 out of 5
55 Add to basket
Sale!
Blimpduino 2.0 Kit
Blimpduino 2.0 Kit
Blimpduino 2.0 Kit

There are two blimpduino KIT options:

1. Get the Small Blimpduino balloon:

 The KIT will contain the small size 32″ foil balloon and a 300 mAh Lipo battery. Perfect for small rooms. This balloon can lift up to 32 grams. Flying time: up to 20 minutes*

2. Get the Medium Blimpduino balloon:

This KIT comes with a medium size 36″ foil balloon. This balloon can lift 47 grams so can you add up to 10 more grams to the blimpduino. Flying time: up to 35 minutes*

 

What you get with the blimpduino KIT:

  • Blimpduino Control Board + fixing bolts
  • 3x DC 3.7v brush-less motors (2x CW + 1 x CCW)
  • 4x 45 mm propellers (2x CW + 2 x CCW)
  • Double sided sticky tape/pads
  • Optional: 3.7V 300mAh or 500mAh Lipo Battery
  • Optional: 3D printed gondola
  • Optional: 32″ or 36″ Foil balloon (Max payload: 32 and 47 grams respectively)
  • Do you need a bigger balloon (+payload)? contact us at: info@jjrobots.com
* The flying time is heavily conditioned by the way you fly the blimp. Servo headers included but not soldered (we did not want to add weight unless you need them)

4.5 out of 5
86 75 Add to basket
NEMA 17 Stepper motor (PACK OF 2/3) + CUSTOM CABLES
NEMA 17 Stepper motor (PACK OF 2/3) + CUSTOM CABLES
NEMA 17 Stepper motor (PACK OF 2/3) + CUSTOM CABLES

This is the motor used in every jjRobots Project. You liked the motors which came with your kit and want another pack of two? Did you like its sturdiness / easy plug-in connector (forget to solder every time you have to change the cable length) ? This is the perfect stepper motor for MAKERs and Robots enthusiasts.

  • These NEMA17 motors deliver up to +32% torque compared to same size regular NEMA17 motors (for the same current demand)
  • With less than 5% step accuracy deviation. 

 

Pick a custom length cable for each motor for free!

SPECIFICATIONS

Manufacturer Part NumberMT-1703HS168A
Step Angle1.8°
Step Accuracy<5%
Holding Torque45 N·cm (62oz.in)
Rated Current/phase1.68A
Phase Resistance1.65ohms
Voltage12-24  V
Inductance3.6mH±20%(1KHz)
Weight280g

5 out of 5
19 Add to basket
Portable Motorized Camera Slider KIT
Portable Motorized Camera Slider KIT
Portable Motorized Camera Slider KIT

JJrobots´s PORTABLE CAMERA SLIDER Kit. Created to simplify the set up and integration of all the different elements involved in this project.

This is a remotely controlled CAMERA SLIDER with tracking system. More info about how it works, here.

 

What you get when you buy this KIT:

  1. GT2 6mm timing belt. Fiber core. (1,5 m)
  2. 3x V-wheel bearings (type B)
  3. USB cable (1 m)
  4. Camera Screw (D Shaft D-ring 1/4 Inch) + smartphone holder
  5. 2x TMC2208 Ultra-silent Stepper motor driver + Heatsinks
  6. Devia Robotics Control Board
  7. 1x 20 tooth GT2 pulley
  8. M3 bolts (10,15,20 mm long)+nuts SET
  9. 3x M5 25mm bolts SET
  10. 6002RS + 7x 623ZZ ball bearing SET

Optional elements:

  1. 3D printed parts 
  2. 12V 2A power supply (USA/EUR/UK plug type)
  3. Camera swivel mount 
  4. 700 mm 2020 BLACK anodized Aluminium v-slot profile
  5. 2 x NEMA 17 stepper motor (MT-1703HS168A) + 75 cm + 14 cm cable (plug and play connectors)

 

CUSTOMIZE YOUR KIT

Save yourself the hassle of getting all the elements from different sources. We will supply everything with the correct dimensions and quantities.

4.64705882353 out of 5
59 Add to basket